ECONOMIC - Saving points for the consumer: Lamps last longer because of the patented lamp mounting system and flow through convection cooling ventilation, the lamps operate cooler and last longer.  There is also lower freight cost; the low weight and volume reduces freight cost.  This lower freight cost actually produces a lower per unit fixture cost to you the customer.

SAFER - C.E. & U.L. Listed for dry or damp location: Uni-Par housings and yokes will not rust and all metal   parts are either stainless steel, triple coated hardened steel, or aluminum. Electrical connections are sealed inside the ceramic lamp socket and the wire is silicon coated with a silicon/woven fiberglass braided outer coat. This is covered with another fiberglass braid and is coated again with acrylic that covers the wiring harness from the housing to the electrical plug.  The plastic housing can not conduct electricity from a shorted cable or lamp. The outside of the housing will not become hot enough to burn someone who accidentally touches it for a few seconds. The high temperature plastic gel-frames are safer because all corners are rounded unlike old metal gel-frames. The user can easily load color media by simply folding open the gel-frame.  The gel-frame is held in place by molded-in plastic pinch tabs.

PRECISE - Balanced yoke mounting: Unipar's are designed so that when the lamp is installed, the unit is balanced at the yoke mounting point and very little force is required to keep the  fixture aimed in the proper direction.  The yoke is attached with a carriage bolt, a flat washer, and a self locking nut on each side. This combination of parts produces a friction controlled pivot point that only needs to be adjusted once.

DURABLE - Every Uni-Par has a warranty: Uni-Par's are so tough that we are the only par can manufacturer in the world to have a "LIMITED LIFETIME WARRANTY / RECYCLE" program.  If ever your par can should break for any reason we will replace it for only the cost to recycle the product; 25% of retail price.   We tracked 8,000 units for a year, out of which only 7 were returned for breakage.  These patented stage lighting fixtures are made of high impact, high temperature, engineered plastic. These are the same materials used in new airliners and even the space program.  Because our units are Injection molded they don't dent and the color is all the way through so scratches aren't visible.